BIOS release 1.3 for AN7 V1.0 Release information: [ENGLISH] 1. Please use flash utility AWDFLASH v8.24F to update AN7 BIOS. 2. Fixed the problem that after pressing "F8" for OC on the fly then press ESC, the reading on the screen will be distorted. 3. Fixed the wake on ring fail problem. 4. Fixed the problem that SATA hard disk will not respond after resuming from S3 mode. 5. Update DRAM DMI information and revise the wording of memory status from "DDR SDRAM at Bank" to "DDR at DIMM" in the system configuration table. 6. Fixed the problem that the DRAM timing is not changed after save and exit BIOS. 7. Enhance SATA device stability. 8. Add resume from S3/S4 mode using USB devices. 9. Fixed the problem that the system cannot boot into Windows if 1) The OS is installed in the SATA hard disk when both the SATA and PATA hard disks are present 2) The PATA hard disk is removed after the OS installation. 10. BIOS compile date: 11/13/2003 [中文] 1. 請使用更新程式 AWDFLASH v8.24F 更新 AN7 BIOS。 2. 修正當按下 F8 做動態超頻時又按下 ESC 鍵,螢幕畫面會破碎的問題。 3. 修正 Wake On Ring 功能失效。 4. 修正由 S3 模式喚醒時 SATA 硬碟無回應的問題。 5. 更新 DRAM DMI 資訊,並修正系統組態表中,記憶體狀態的字串由 "DDR SDRAM at Bank" 改為 "DDR at DIMM" 。 6. 修正無法儲存 DRAM timing 資料。 7. 增強 SATA 裝置穩定性。 8. 增加可使用 USB 裝置喚醒 S3/S4 模式。 9 修正當滿足以下兩個條件時,系統無法開進 Windows 作業系統, 1) 在 SATA 硬碟上安裝作業系統時,且系統上同時存在SATA 跟 PATA 硬碟。 2) 在安裝完作業系統後移除 PATA 硬碟。 10. BIOS 日期: 11/13/2003 ********************************* NOTE ********************************* 1. How to upgrade BIOS: a. Boot into MS-DOS or "Safe mode and command prompt" if you are using Windows95/98 b. Run "an713.exe" to extract all files. c. Run "runme.bat" *** Please notice that we suggest you flashing the bios with switches "/py /sn /cd /cp /cc /cks /R" or by "runme.bat". d. For more detail, please visit: http://fae.abit.com.tw/cht/download/bioshelp.htm (Chinese) http://fae.abit.com.tw/eng/download/bioshelp.htm (English) 2.After BIOS updated, pull off the power cord and then clear the CMOS data via jumper before restarting system please. ============================================================================